CSP configurescan 3.0
JSON schema and example for CSP Mid configure
CSP config 3.0
Example (TMC input for science_a visibility scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for science_a visibility scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
],
"output_host": [
[0, "192.168.0.1"],
[400, "192.168.0.2"]
],
"output_port": [
[0, 9000],
[20, 9001],
[40, 9002],
[60, 9003],
[80, 9004],
[100, 9005],
[120, 9006],
[140, 9007],
[160, 9008],
[180, 9009],
[200, 9010],
[220, 9011],
[240, 9012],
[260, 9013],
[280, 9014],
[300, 9015],
[320, 9016],
[340, 9017],
[360, 9018],
[380, 9019],
[400, 9000],
[420, 9001],
[440, 9002],
[460, 9003],
[480, 9004],
[500, 9005],
[520, 9006],
[540, 9007],
[560, 9008],
[580, 9009],
[600, 9010],
[620, 9011],
[640, 9012],
[660, 9013],
[680, 9014],
[700, 9015],
[720, 9016]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
],
"output_host": [
[0, "192.168.0.3"],
[400, "192.168.0.4"]
],
"output_port": [
[0, 9000],
[20, 9001],
[40, 9002],
[60, 9003],
[80, 9004],
[100, 9005],
[120, 9006],
[140, 9007],
[160, 9008],
[180, 9009],
[200, 9010],
[220, 9011],
[240, 9012],
[260, 9013],
[280, 9014],
[300, 9015],
[320, 9016],
[340, 9017],
[360, 9018],
[380, 9019],
[400, 9000],
[420, 9001],
[440, 9002],
[460, 9003],
[480, 9004],
[500, 9005],
[520, 9006],
[540, 9007],
[560, 9008],
[580, 9009],
[600, 9010],
[620, 9011],
[640, 9012],
[660, 9013],
[680, 9014],
[700, 9015],
[720, 9016],
[740, 9017],
[760, 9018],
[780, 9019],
[800, 9020],
[820, 9021],
[840, 9022],
[860, 9023],
[880, 9024],
[900, 9025],
[920, 9026],
[940, 9027],
[960, 9028],
[980, 9029],
[1000, 9030],
[1020, 9031],
[1040, 9032],
[1060, 9033],
[1080, 9034],
[1100, 9035],
[1120, 9036],
[1140, 9037],
[1160, 9038],
[1180, 9039],
[1200, 9040],
[1220, 9041],
[1240, 9042],
[1260, 9043],
[1280, 9044],
[1300, 9045],
[1320, 9046],
[1340, 9047],
[1360, 9048],
[1380, 9049],
[1400, 9050],
[1420, 9051],
[1440, 9052],
[1460, 9053],
[1480, 9054],
[1500, 9055],
[1520, 9056],
[1540, 9057],
[1560, 9058],
[1580, 9059],
[1600, 9060],
[1620, 9061],
[1640, 9062],
[1660, 9063],
[1680, 9064],
[1700, 9065],
[1720, 9066],
[1740, 9067],
[1760, 9068],
[1780, 9069],
[1800, 9070],
[1820, 9071],
[1840, 9072],
[1860, 9073],
[1880, 9074],
[1900, 9075],
[1920, 9076],
[1940, 9077],
[1960, 9078],
[1980, 9079],
[2000, 9080],
[2020, 9081],
[2040, 9082],
[2060, 9083],
[2080, 9084],
[2100, 9085],
[2120, 9086],
[2140, 9087],
[2160, 9088],
[2180, 9089],
[2200, 9090],
[2220, 9091],
[2240, 9092],
[2260, 9093],
[2280, 9094],
[2300, 9095],
[2320, 9096],
[2340, 9097],
[2360, 9098],
[2380, 9099],
[2400, 9100],
[2420, 9101],
[2440, 9102],
[2460, 9103],
[2480, 9104],
[2500, 9105],
[2520, 9106],
[2540, 9107],
[2560, 9108],
[2580, 9109],
[2600, 9110],
[2620, 9111],
[2640, 9112],
[2660, 9113],
[2680, 9114],
[2700, 9115],
[2720, 9116],
[2740, 9117],
[2760, 9118],
[2780, 9119],
[2800, 9120],
[2820, 9121],
[2840, 9122],
[2860, 9123],
[2880, 9124],
[2900, 9125],
[2920, 9126],
[2940, 9127],
[2960, 9128],
[2980, 9129],
[3000, 9130],
[3020, 9131],
[3040, 9132],
[3060, 9133],
[3080, 9134],
[3100, 9135],
[3120, 9136],
[3140, 9137],
[3160, 9138],
[3180, 9139],
[3200, 9140],
[3220, 9141],
[3240, 9142],
[3260, 9143],
[3280, 9144],
[3300, 9145],
[3320, 9146],
[3340, 9147],
[3360, 9148],
[3380, 9149],
[3400, 9150],
[3420, 9151],
[3440, 9152],
[3460, 9153],
[3480, 9154],
[3500, 9155],
[3520, 9156],
[3540, 9157],
[3560, 9158],
[3580, 9159],
[3600, 9160],
[3620, 9161],
[3640, 9162],
[3660, 9163],
[3680, 9164],
[3700, 9165],
[3720, 9166],
[3740, 9167],
[3760, 9168],
[3780, 9169],
[3800, 9170],
[3820, 9171],
[3840, 9172],
[3860, 9173],
[3880, 9174],
[3900, 9175],
[3920, 9176],
[3940, 9177],
[3960, 9178],
[3980, 9179],
[4000, 9180],
[4020, 9181],
[4040, 9182],
[4060, 9183],
[4080, 9184],
[4100, 9185],
[4120, 9186],
[4140, 9187],
[4160, 9188],
[4180, 9189],
[4200, 9190],
[4220, 9191],
[4240, 9192],
[4260, 9193],
[4280, 9194],
[4300, 9195],
[4320, 9196],
[4340, 9197],
[4360, 9198],
[4380, 9199],
[4400, 9200],
[4420, 9201],
[4440, 9202],
[4460, 9203],
[4480, 9204],
[4500, 9205],
[4520, 9206],
[4540, 9207],
[4560, 9208],
[4580, 9209],
[4600, 9210],
[4620, 9211],
[4640, 9212],
[4660, 9213],
[4680, 9214],
[4700, 9215],
[4720, 9216],
[4740, 9217],
[4760, 9218],
[4780, 9219],
[4800, 9220],
[4820, 9221],
[4840, 9222],
[4860, 9223],
[4880, 9224],
[4900, 9225],
[4920, 9226],
[4940, 9227],
[4960, 9228],
[4980, 9229],
[5000, 9230],
[5020, 9231],
[5040, 9232],
[5060, 9233],
[5080, 9234],
[5100, 9235],
[5120, 9236],
[5140, 9237],
[5160, 9238],
[5180, 9239],
[5200, 9240],
[5220, 9241],
[5240, 9242],
[5260, 9243],
[5280, 9244],
[5300, 9245],
[5320, 9246],
[5340, 9247],
[5360, 9248],
[5380, 9249],
[5400, 9250],
[5420, 9251],
[5440, 9252],
[5460, 9253],
[5480, 9254],
[5500, 9255],
[5520, 9256],
[5540, 9257],
[5560, 9258],
[5580, 9259],
[5600, 9260],
[5620, 9261],
[5640, 9262],
[5660, 9263],
[5680, 9264],
[5700, 9265],
[5720, 9266],
[5740, 9267],
[5760, 9268],
[5780, 9269],
[5800, 9270],
[5820, 9271],
[5840, 9272],
[5860, 9273],
[5880, 9274],
[5900, 9275],
[5920, 9276],
[5940, 9277],
[5960, 9278],
[5980, 9279],
[6000, 9280],
[6020, 9281],
[6040, 9282],
[6060, 9283],
[6080, 9284],
[6100, 9285],
[6120, 9286],
[6140, 9287],
[6160, 9288],
[6180, 9289],
[6200, 9290],
[6220, 9291],
[6240, 9292],
[6260, 9293],
[6280, 9294],
[6300, 9295],
[6320, 9296],
[6340, 9297],
[6360, 9298],
[6380, 9299],
[6400, 9300],
[6420, 9301],
[6440, 9302],
[6460, 9303],
[6480, 9304],
[6500, 9305],
[6520, 9306],
[6540, 9307],
[6560, 9308],
[6580, 9309],
[6600, 9310],
[6620, 9311],
[6640, 9312],
[6660, 9313],
[6680, 9314],
[6700, 9315],
[6720, 9316],
[6740, 9317],
[6760, 9318],
[6780, 9319],
[6800, 9320],
[6820, 9321],
[6840, 9322],
[6860, 9323],
[6880, 9324],
[6900, 9325],
[6920, 9326],
[6940, 9327],
[6960, 9328],
[6980, 9329],
[7000, 9330],
[7020, 9331],
[7040, 9332],
[7060, 9333],
[7080, 9334],
[7100, 9335],
[7120, 9336],
[7140, 9337],
[7160, 9338],
[7180, 9339],
[7200, 9340],
[7220, 9341],
[7240, 9342],
[7260, 9343],
[7280, 9344],
[7300, 9345],
[7320, 9346],
[7340, 9347],
[7360, 9348],
[7380, 9349],
[7400, 9350],
[7420, 9351],
[7440, 9352],
[7460, 9353],
[7480, 9354],
[7500, 9355],
[7520, 9356],
[7540, 9357],
[7560, 9358],
[7580, 9359],
[7600, 9360],
[7620, 9361],
[7640, 9362],
[7660, 9363],
[7680, 9364],
[7700, 9365],
[7720, 9366],
[7740, 9367],
[7760, 9368],
[7780, 9369],
[7800, 9370],
[7820, 9371],
[7840, 9372],
[7860, 9373],
[7880, 9374],
[7900, 9375],
[7920, 9376],
[7940, 9377],
[7960, 9378],
[7980, 9379],
[8000, 9380],
[8020, 9381],
[8040, 9382],
[8060, 9383],
[8080, 9384],
[8100, 9385],
[8120, 9386],
[8140, 9387],
[8160, 9388],
[8180, 9389],
[8200, 9390],
[8220, 9391],
[8240, 9392],
[8260, 9393],
[8280, 9394],
[8300, 9395],
[8320, 9396],
[8340, 9397],
[8360, 9398],
[8380, 9399],
[8400, 9400],
[8420, 9401],
[8440, 9402],
[8460, 9403],
[8480, 9404],
[8500, 9405],
[8520, 9406],
[8540, 9407],
[8560, 9408],
[8580, 9409],
[8600, 9410],
[8620, 9411],
[8640, 9412],
[8660, 9413],
[8680, 9414],
[8700, 9415],
[8720, 9416],
[8740, 9417],
[8760, 9418],
[8780, 9419],
[8800, 9420],
[8820, 9421],
[8840, 9422],
[8860, 9423],
[8880, 9424],
[8900, 9425],
[8920, 9426],
[8940, 9427],
[8960, 9428],
[8980, 9429],
[9000, 9430],
[9020, 9431],
[9040, 9432],
[9060, 9433],
[9080, 9434],
[9100, 9435],
[9120, 9436],
[9140, 9437],
[9160, 9438],
[9180, 9439],
[9200, 9440],
[9220, 9441],
[9240, 9442],
[9260, 9443],
[9280, 9444],
[9300, 9445],
[9320, 9446],
[9340, 9447],
[9360, 9448],
[9380, 9449],
[9400, 9450],
[9420, 9451],
[9440, 9452],
[9460, 9453],
[9480, 9454],
[9500, 9455],
[9520, 9456],
[9540, 9457],
[9560, 9458],
[9580, 9459],
[9600, 9460],
[9620, 9461],
[9640, 9462],
[9660, 9463],
[9680, 9464],
[9700, 9465],
[9720, 9466],
[9740, 9467],
[9760, 9468],
[9780, 9469],
[9800, 9470],
[9820, 9471],
[9840, 9472],
[9860, 9473],
[9880, 9474],
[9900, 9475],
[9920, 9476],
[9940, 9477],
[9960, 9478],
[9980, 9479],
[10000, 9480],
[10020, 9481],
[10040, 9482],
[10060, 9483],
[10080, 9484],
[10100, 9485],
[10120, 9486],
[10140, 9487],
[10160, 9488],
[10180, 9489],
[10200, 9490],
[10220, 9491],
[10240, 9492],
[10260, 9493],
[10280, 9494],
[10300, 9495],
[10320, 9496],
[10340, 9497],
[10360, 9498],
[10380, 9499],
[10400, 9500],
[10420, 9501],
[10440, 9502],
[10460, 9503],
[10480, 9504],
[10500, 9505],
[10520, 9506],
[10540, 9507],
[10560, 9508],
[10580, 9509],
[10600, 9510],
[10620, 9511],
[10640, 9512],
[10660, 9513],
[10680, 9514],
[10700, 9515],
[10720, 9516],
[10740, 9517],
[10760, 9518],
[10780, 9519],
[10800, 9520],
[10820, 9521],
[10840, 9522],
[10860, 9523],
[10880, 9524],
[10900, 9525],
[10920, 9526],
[10940, 9527],
[10960, 9528],
[10980, 9529],
[11000, 9530],
[11020, 9531],
[11040, 9532],
[11060, 9533],
[11080, 9534],
[11100, 9535],
[11120, 9536],
[11140, 9537],
[11160, 9538],
[11180, 9539],
[11200, 9540],
[11220, 9541],
[11240, 9542],
[11260, 9543],
[11280, 9544],
[11300, 9545],
[11320, 9546],
[11340, 9547],
[11360, 9548],
[11380, 9549],
[11400, 9550],
[11420, 9551],
[11440, 9552],
[11460, 9553],
[11480, 9554],
[11500, 9555],
[11520, 9556],
[11540, 9557],
[11560, 9558],
[11580, 9559],
[11600, 9560],
[11620, 9561],
[11640, 9562],
[11660, 9563],
[11680, 9564],
[11700, 9565],
[11720, 9566],
[11740, 9567],
[11760, 9568],
[11780, 9569],
[11800, 9570],
[11820, 9571],
[11840, 9572],
[11860, 9573],
[11880, 9574],
[11900, 9575],
[11920, 9576],
[11940, 9577],
[11960, 9578],
[11980, 9579],
[12000, 9580],
[12020, 9581],
[12040, 9582],
[12060, 9583],
[12080, 9584],
[12100, 9585],
[12120, 9586],
[12140, 9587],
[12160, 9588],
[12180, 9589],
[12200, 9590],
[12220, 9591],
[12240, 9592],
[12260, 9593],
[12280, 9594],
[12300, 9595],
[12320, 9596],
[12340, 9597],
[12360, 9598],
[12380, 9599],
[12400, 9600],
[12420, 9601],
[12440, 9602],
[12460, 9603],
[12480, 9604],
[12500, 9605],
[12520, 9606],
[12540, 9607],
[12560, 9608],
[12580, 9609],
[12600, 9610],
[12620, 9611],
[12640, 9612],
[12660, 9613],
[12680, 9614],
[12700, 9615],
[12720, 9616],
[12740, 9617],
[12760, 9618],
[12780, 9619],
[12800, 9620],
[12820, 9621],
[12840, 9622],
[12860, 9623],
[12880, 9624],
[12900, 9625],
[12920, 9626],
[12940, 9627],
[12960, 9628],
[12980, 9629],
[13000, 9630],
[13020, 9631],
[13040, 9632],
[13060, 9633],
[13080, 9634],
[13100, 9635],
[13120, 9636],
[13140, 9637],
[13160, 9638],
[13180, 9639],
[13200, 9640],
[13220, 9641],
[13240, 9642],
[13260, 9643],
[13280, 9644],
[13300, 9645],
[13320, 9646],
[13340, 9647],
[13360, 9648],
[13380, 9649],
[13400, 9650],
[13420, 9651],
[13440, 9652],
[13460, 9653],
[13480, 9654],
[13500, 9655],
[13520, 9656],
[13540, 9657],
[13560, 9658],
[13580, 9659],
[13600, 9660],
[13620, 9661],
[13640, 9662],
[13660, 9663],
[13680, 9664],
[13700, 9665],
[13720, 9666],
[13740, 9667],
[13760, 9668],
[13780, 9669],
[13800, 9670],
[13820, 9671],
[13840, 9672],
[13860, 9673],
[13880, 9674],
[13900, 9675],
[13920, 9676],
[13940, 9677],
[13960, 9678],
[13980, 9679],
[14000, 9680],
[14020, 9681],
[14040, 9682],
[14060, 9683],
[14080, 9684],
[14100, 9685],
[14120, 9686]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for cal_a visibility scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
],
"output_host": [
[0, "192.168.1.1"]
],
"output_port": [
[0, 9000],
[20, 9001],
[40, 9002],
[60, 9003],
[80, 9004],
[100, 9005],
[120, 9006],
[140, 9007],
[160, 9008],
[180, 9009],
[200, 9010],
[220, 9011],
[240, 9012],
[260, 9013],
[280, 9014],
[300, 9015],
[320, 9016],
[340, 9017],
[360, 9018],
[380, 9019],
[400, 9020],
[420, 9021],
[440, 9022],
[460, 9023],
[480, 9024],
[500, 9025],
[520, 9026],
[540, 9027],
[560, 9028],
[580, 9029],
[600, 9030],
[620, 9031],
[640, 9032],
[660, 9033],
[680, 9034],
[700, 9035],
[720, 9036]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
],
"output_host": [
[0, "192.168.1.1"]
],
"output_port": [
[0, 9037],
[20, 9038],
[40, 9039],
[60, 9040],
[80, 9041],
[100, 9042],
[120, 9043],
[140, 9044],
[160, 9045],
[180, 9046],
[200, 9047],
[220, 9048],
[240, 9049],
[260, 9050],
[280, 9051],
[300, 9052],
[320, 9053],
[340, 9054],
[360, 9055],
[380, 9056],
[400, 9057],
[420, 9058],
[440, 9059],
[460, 9060],
[480, 9061],
[500, 9062],
[520, 9063],
[540, 9064],
[560, 9065],
[580, 9066],
[600, 9067],
[620, 9068],
[640, 9069],
[660, 9070],
[680, 9071],
[700, 9072],
[720, 9073],
[740, 9074],
[760, 9075],
[780, 9076],
[800, 9077],
[820, 9078],
[840, 9079],
[860, 9080],
[880, 9081],
[900, 9082],
[920, 9083],
[940, 9084],
[960, 9085],
[980, 9086],
[1000, 9087],
[1020, 9088],
[1040, 9089],
[1060, 9090],
[1080, 9091],
[1100, 9092],
[1120, 9093],
[1140, 9094],
[1160, 9095],
[1180, 9096],
[1200, 9097],
[1220, 9098],
[1240, 9099],
[1260, 9100],
[1280, 9101],
[1300, 9102],
[1320, 9103],
[1340, 9104],
[1360, 9105],
[1380, 9106],
[1400, 9107],
[1420, 9108],
[1440, 9109],
[1460, 9110],
[1480, 9111],
[1500, 9112],
[1520, 9113],
[1540, 9114],
[1560, 9115],
[1580, 9116],
[1600, 9117],
[1620, 9118],
[1640, 9119],
[1660, 9120],
[1680, 9121],
[1700, 9122],
[1720, 9123],
[1740, 9124],
[1760, 9125],
[1780, 9126],
[1800, 9127],
[1820, 9128],
[1840, 9129],
[1860, 9130],
[1880, 9131],
[1900, 9132],
[1920, 9133],
[1940, 9134],
[1960, 9135],
[1980, 9136],
[2000, 9137],
[2020, 9138],
[2040, 9139],
[2060, 9140],
[2080, 9141],
[2100, 9142],
[2120, 9143],
[2140, 9144],
[2160, 9145],
[2180, 9146],
[2200, 9147],
[2220, 9148],
[2240, 9149],
[2260, 9150],
[2280, 9151],
[2300, 9152],
[2320, 9153],
[2340, 9154],
[2360, 9155],
[2380, 9156],
[2400, 9157],
[2420, 9158],
[2440, 9159],
[2460, 9160],
[2480, 9161],
[2500, 9162],
[2520, 9163],
[2540, 9164],
[2560, 9165],
[2580, 9166],
[2600, 9167],
[2620, 9168],
[2640, 9169],
[2660, 9170],
[2680, 9171],
[2700, 9172],
[2720, 9173],
[2740, 9174],
[2760, 9175],
[2780, 9176],
[2800, 9177],
[2820, 9178],
[2840, 9179],
[2860, 9180],
[2880, 9181],
[2900, 9182],
[2920, 9183],
[2940, 9184],
[2960, 9185],
[2980, 9186],
[3000, 9187],
[3020, 9188],
[3040, 9189],
[3060, 9190],
[3080, 9191],
[3100, 9192],
[3120, 9193],
[3140, 9194],
[3160, 9195],
[3180, 9196],
[3200, 9197],
[3220, 9198],
[3240, 9199],
[3260, 9200],
[3280, 9201],
[3300, 9202],
[3320, 9203],
[3340, 9204],
[3360, 9205],
[3380, 9206],
[3400, 9207],
[3420, 9208],
[3440, 9209],
[3460, 9210],
[3480, 9211],
[3500, 9212],
[3520, 9213],
[3540, 9214],
[3560, 9215],
[3580, 9216],
[3600, 9217],
[3620, 9218],
[3640, 9219],
[3660, 9220],
[3680, 9221],
[3700, 9222],
[3720, 9223],
[3740, 9224],
[3760, 9225],
[3780, 9226],
[3800, 9227],
[3820, 9228],
[3840, 9229],
[3860, 9230],
[3880, 9231],
[3900, 9232],
[3920, 9233],
[3940, 9234],
[3960, 9235],
[3980, 9236],
[4000, 9237],
[4020, 9238],
[4040, 9239],
[4060, 9240],
[4080, 9241],
[4100, 9242],
[4120, 9243],
[4140, 9244],
[4160, 9245],
[4180, 9246],
[4200, 9247],
[4220, 9248],
[4240, 9249],
[4260, 9250],
[4280, 9251],
[4300, 9252],
[4320, 9253],
[4340, 9254],
[4360, 9255],
[4380, 9256],
[4400, 9257],
[4420, 9258],
[4440, 9259],
[4460, 9260],
[4480, 9261],
[4500, 9262],
[4520, 9263],
[4540, 9264],
[4560, 9265],
[4580, 9266],
[4600, 9267],
[4620, 9268],
[4640, 9269],
[4660, 9270],
[4680, 9271],
[4700, 9272],
[4720, 9273],
[4740, 9274],
[4760, 9275],
[4780, 9276],
[4800, 9277],
[4820, 9278],
[4840, 9279],
[4860, 9280],
[4880, 9281],
[4900, 9282],
[4920, 9283],
[4940, 9284],
[4960, 9285],
[4980, 9286],
[5000, 9287],
[5020, 9288],
[5040, 9289],
[5060, 9290],
[5080, 9291],
[5100, 9292],
[5120, 9293],
[5140, 9294],
[5160, 9295],
[5180, 9296],
[5200, 9297],
[5220, 9298],
[5240, 9299],
[5260, 9300],
[5280, 9301],
[5300, 9302],
[5320, 9303],
[5340, 9304],
[5360, 9305],
[5380, 9306],
[5400, 9307],
[5420, 9308],
[5440, 9309],
[5460, 9310],
[5480, 9311],
[5500, 9312],
[5520, 9313],
[5540, 9314],
[5560, 9315],
[5580, 9316],
[5600, 9317],
[5620, 9318],
[5640, 9319],
[5660, 9320],
[5680, 9321],
[5700, 9322],
[5720, 9323],
[5740, 9324],
[5760, 9325],
[5780, 9326],
[5800, 9327],
[5820, 9328],
[5840, 9329],
[5860, 9330],
[5880, 9331],
[5900, 9332],
[5920, 9333],
[5940, 9334],
[5960, 9335],
[5980, 9336],
[6000, 9337],
[6020, 9338],
[6040, 9339],
[6060, 9340],
[6080, 9341],
[6100, 9342],
[6120, 9343],
[6140, 9344],
[6160, 9345],
[6180, 9346],
[6200, 9347],
[6220, 9348],
[6240, 9349],
[6260, 9350],
[6280, 9351],
[6300, 9352],
[6320, 9353],
[6340, 9354],
[6360, 9355],
[6380, 9356],
[6400, 9357],
[6420, 9358],
[6440, 9359],
[6460, 9360],
[6480, 9361],
[6500, 9362],
[6520, 9363],
[6540, 9364],
[6560, 9365],
[6580, 9366],
[6600, 9367],
[6620, 9368],
[6640, 9369],
[6660, 9370],
[6680, 9371],
[6700, 9372],
[6720, 9373],
[6740, 9374],
[6760, 9375],
[6780, 9376],
[6800, 9377],
[6820, 9378],
[6840, 9379],
[6860, 9380],
[6880, 9381],
[6900, 9382],
[6920, 9383],
[6940, 9384],
[6960, 9385],
[6980, 9386],
[7000, 9387],
[7020, 9388],
[7040, 9389],
[7060, 9390],
[7080, 9391],
[7100, 9392],
[7120, 9393],
[7140, 9394],
[7160, 9395],
[7180, 9396],
[7200, 9397],
[7220, 9398],
[7240, 9399],
[7260, 9400],
[7280, 9401],
[7300, 9402],
[7320, 9403],
[7340, 9404],
[7360, 9405],
[7380, 9406],
[7400, 9407],
[7420, 9408],
[7440, 9409],
[7460, 9410],
[7480, 9411],
[7500, 9412],
[7520, 9413],
[7540, 9414],
[7560, 9415],
[7580, 9416],
[7600, 9417],
[7620, 9418],
[7640, 9419],
[7660, 9420],
[7680, 9421],
[7700, 9422],
[7720, 9423],
[7740, 9424],
[7760, 9425],
[7780, 9426],
[7800, 9427],
[7820, 9428],
[7840, 9429],
[7860, 9430],
[7880, 9431],
[7900, 9432],
[7920, 9433],
[7940, 9434],
[7960, 9435],
[7980, 9436],
[8000, 9437],
[8020, 9438],
[8040, 9439],
[8060, 9440],
[8080, 9441],
[8100, 9442],
[8120, 9443],
[8140, 9444],
[8160, 9445],
[8180, 9446],
[8200, 9447],
[8220, 9448],
[8240, 9449],
[8260, 9450],
[8280, 9451],
[8300, 9452],
[8320, 9453],
[8340, 9454],
[8360, 9455],
[8380, 9456],
[8400, 9457],
[8420, 9458],
[8440, 9459],
[8460, 9460],
[8480, 9461],
[8500, 9462],
[8520, 9463],
[8540, 9464],
[8560, 9465],
[8580, 9466],
[8600, 9467],
[8620, 9468],
[8640, 9469],
[8660, 9470],
[8680, 9471],
[8700, 9472],
[8720, 9473],
[8740, 9474],
[8760, 9475],
[8780, 9476],
[8800, 9477],
[8820, 9478],
[8840, 9479],
[8860, 9480],
[8880, 9481],
[8900, 9482],
[8920, 9483],
[8940, 9484],
[8960, 9485],
[8980, 9486],
[9000, 9487],
[9020, 9488],
[9040, 9489],
[9060, 9490],
[9080, 9491],
[9100, 9492],
[9120, 9493],
[9140, 9494],
[9160, 9495],
[9180, 9496],
[9200, 9497],
[9220, 9498],
[9240, 9499],
[9260, 9500],
[9280, 9501],
[9300, 9502],
[9320, 9503],
[9340, 9504],
[9360, 9505],
[9380, 9506],
[9400, 9507],
[9420, 9508],
[9440, 9509],
[9460, 9510],
[9480, 9511],
[9500, 9512],
[9520, 9513],
[9540, 9514],
[9560, 9515],
[9580, 9516],
[9600, 9517],
[9620, 9518],
[9640, 9519],
[9660, 9520],
[9680, 9521],
[9700, 9522],
[9720, 9523],
[9740, 9524],
[9760, 9525],
[9780, 9526],
[9800, 9527],
[9820, 9528],
[9840, 9529],
[9860, 9530],
[9880, 9531],
[9900, 9532],
[9920, 9533],
[9940, 9534],
[9960, 9535],
[9980, 9536],
[10000, 9537],
[10020, 9538],
[10040, 9539],
[10060, 9540],
[10080, 9541],
[10100, 9542],
[10120, 9543],
[10140, 9544],
[10160, 9545],
[10180, 9546],
[10200, 9547],
[10220, 9548],
[10240, 9549],
[10260, 9550],
[10280, 9551],
[10300, 9552],
[10320, 9553],
[10340, 9554],
[10360, 9555],
[10380, 9556],
[10400, 9557],
[10420, 9558],
[10440, 9559],
[10460, 9560],
[10480, 9561],
[10500, 9562],
[10520, 9563],
[10540, 9564],
[10560, 9565],
[10580, 9566],
[10600, 9567],
[10620, 9568],
[10640, 9569],
[10660, 9570],
[10680, 9571],
[10700, 9572],
[10720, 9573],
[10740, 9574],
[10760, 9575],
[10780, 9576],
[10800, 9577],
[10820, 9578],
[10840, 9579],
[10860, 9580],
[10880, 9581],
[10900, 9582],
[10920, 9583],
[10940, 9584],
[10960, 9585],
[10980, 9586],
[11000, 9587],
[11020, 9588],
[11040, 9589],
[11060, 9590],
[11080, 9591],
[11100, 9592],
[11120, 9593],
[11140, 9594],
[11160, 9595],
[11180, 9596],
[11200, 9597],
[11220, 9598],
[11240, 9599],
[11260, 9600],
[11280, 9601],
[11300, 9602],
[11320, 9603],
[11340, 9604],
[11360, 9605],
[11380, 9606],
[11400, 9607],
[11420, 9608],
[11440, 9609],
[11460, 9610],
[11480, 9611],
[11500, 9612],
[11520, 9613],
[11540, 9614],
[11560, 9615],
[11580, 9616],
[11600, 9617],
[11620, 9618],
[11640, 9619],
[11660, 9620],
[11680, 9621],
[11700, 9622],
[11720, 9623],
[11740, 9624],
[11760, 9625],
[11780, 9626],
[11800, 9627],
[11820, 9628],
[11840, 9629],
[11860, 9630],
[11880, 9631],
[11900, 9632],
[11920, 9633],
[11940, 9634],
[11960, 9635],
[11980, 9636],
[12000, 9637],
[12020, 9638],
[12040, 9639],
[12060, 9640],
[12080, 9641],
[12100, 9642],
[12120, 9643],
[12140, 9644],
[12160, 9645],
[12180, 9646],
[12200, 9647],
[12220, 9648],
[12240, 9649],
[12260, 9650],
[12280, 9651],
[12300, 9652],
[12320, 9653],
[12340, 9654],
[12360, 9655],
[12380, 9656],
[12400, 9657],
[12420, 9658],
[12440, 9659],
[12460, 9660],
[12480, 9661],
[12500, 9662],
[12520, 9663],
[12540, 9664],
[12560, 9665],
[12580, 9666],
[12600, 9667],
[12620, 9668],
[12640, 9669],
[12660, 9670],
[12680, 9671],
[12700, 9672],
[12720, 9673],
[12740, 9674],
[12760, 9675],
[12780, 9676],
[12800, 9677],
[12820, 9678],
[12840, 9679],
[12860, 9680],
[12880, 9681],
[12900, 9682],
[12920, 9683],
[12940, 9684],
[12960, 9685],
[12980, 9686],
[13000, 9687],
[13020, 9688],
[13040, 9689],
[13060, 9690],
[13080, 9691],
[13100, 9692],
[13120, 9693],
[13140, 9694],
[13160, 9695],
[13180, 9696],
[13200, 9697],
[13220, 9698],
[13240, 9699],
[13260, 9700],
[13280, 9701],
[13300, 9702],
[13320, 9703],
[13340, 9704],
[13360, 9705],
[13380, 9706],
[13400, 9707],
[13420, 9708],
[13440, 9709],
[13460, 9710],
[13480, 9711],
[13500, 9712],
[13520, 9713],
[13540, 9714],
[13560, 9715],
[13580, 9716],
[13600, 9717],
[13620, 9718],
[13640, 9719],
[13660, 9720],
[13680, 9721],
[13700, 9722],
[13720, 9723],
[13740, 9724],
[13760, 9725],
[13780, 9726],
[13800, 9727],
[13820, 9728],
[13840, 9729],
[13860, 9730],
[13880, 9731],
[13900, 9732],
[13920, 9733],
[13940, 9734],
[13960, 9735],
[13980, 9736],
[14000, 9737],
[14020, 9738],
[14040, 9739],
[14060, 9740],
[14080, 9741],
[14100, 9742],
[14120, 9743]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PSS scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "PSS-BF",
"frequency_slice_id": 1,
"integration_factor": 1,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"output_link_map": [
[0, 1]
],
"channel_offset": 740
}],
"search_window": [{
"search_window_id": 0,
"search_window_tuning": 1000
}],
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pss": {
"beam": [{
"beam_id": 1,
"reference_frame": "ICRS",
"ra": 82.75,
"dec": 21.0,
"centre_frequency": 1400.0,
"beam_delay_centre": 0.0,
"dest_host": "192.168.178.25",
"dest_port": 9021
}, {
"beam_id": 2,
"reference_frame": "ICRS",
"ra": 84.25,
"dec": 21.5,
"centre_frequency": 1400.0,
"beam_delay_centre": 0.0,
"dest_host": "192.168.178.26",
"dest_port": 9021
}]
},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PST beam configuration)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {
"beam": {}
},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PST pulsar timing scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {
"scan": {
"activation_time": "2022-01-19T23:07:45Z",
"timing_beam_id": "1",
"bits_per_sample": 32,
"num_of_polarizations": 2,
"udp_nsamp": 32,
"wt_nsamp": 32,
"udp_nchan": 24,
"num_frequency_channels": 432,
"centre_frequency": 100000000.0,
"total_bandwidth": 361689.8148,
"observation_mode": "PULSAR_TIMING",
"observer_id": "jdoe",
"project_id": "project1",
"pointing_id": "pointing1",
"source": "J1921+2153",
"itrf": [5109360.133, 2006852.586, -3238948.127],
"receiver_id": "receiver3",
"feed_polarization": "CIRC",
"feed_handedness": 1,
"feed_angle": 1.234,
"feed_tracking_mode": "FA",
"feed_position_angle": 10.0,
"oversampling_ratio": [8, 7],
"coordinates": {
"ra": "19:21:44.815",
"dec": "21.884"
},
"max_scan_length": 10000.5,
"subint_duration": 30.0,
"receptors": ["SKA001", "SKA036"],
"receptor_weights": [0.4, 0.6],
"num_rfi_frequency_masks": 1,
"rfi_frequency_masks": [
[1.0, 1.1]
],
"destination_address": ["192.168.178.26", 9021],
"num_channelization_stages": 1,
"channelization_stages": [{
"num_filter_taps": 1,
"filter_coefficients": [1.0],
"num_frequency_channels": 10,
"oversampling_ratio": [8, 7]
}],
"pt": {
"dispersion_measure": 100.0,
"rotation_measure": 0.0,
"ephemeris": "",
"pulsar_phase_predictor": "",
"output_frequency_channels": 1,
"output_phase_bins": 64,
"num_sk_config": 1,
"sk_config": [{
"sk_range": [0.8, 0.9],
"sk_integration_limit": 100,
"sk_excision_limit": 25.0
}],
"target_snr": 0.0
}
}
},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PST dynamic spectrum scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {
"scan": {
"activation_time": "2022-01-19T23:07:45Z",
"timing_beam_id": "1",
"bits_per_sample": 32,
"num_of_polarizations": 2,
"udp_nsamp": 32,
"wt_nsamp": 32,
"udp_nchan": 24,
"num_frequency_channels": 432,
"centre_frequency": 100000000.0,
"total_bandwidth": 361689.8148,
"observation_mode": "DYNAMIC_SPECTRUM",
"observer_id": "jdoe",
"project_id": "project1",
"pointing_id": "pointing1",
"source": "J1921+2153",
"itrf": [5109360.133, 2006852.586, -3238948.127],
"receiver_id": "receiver3",
"feed_polarization": "CIRC",
"feed_handedness": 1,
"feed_angle": 1.234,
"feed_tracking_mode": "FA",
"feed_position_angle": 10.0,
"oversampling_ratio": [8, 7],
"coordinates": {
"equinox": 2000.0,
"ra": "19:21:44.815",
"dec": "21.884"
},
"max_scan_length": 13000.2,
"subint_duration": 30.0,
"receptors": ["SKA001", "SKA036"],
"receptor_weights": [0.4, 0.6],
"num_rfi_frequency_masks": 1,
"rfi_frequency_masks": [
[1.0, 1.1]
],
"destination_address": ["192.168.178.26", 9021],
"num_channelization_stages": 1,
"channelization_stages": [{
"num_filter_taps": 1,
"filter_coefficients": [1.0],
"num_frequency_channels": 10,
"oversampling_ratio": [8, 7]
}],
"ds": {
"dispersion_measure": 100.0,
"output_frequency_channels": 1,
"stokes_parameters": "Q",
"num_bits_out": 16,
"time_decimation_factor": 10,
"frequency_decimation_factor": 4,
"requantisation_scale": 1.0,
"requantisation_length": 1.0
}
}
},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PST flow through scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {
"scan": {
"activation_time": "2022-01-19T23:07:45Z",
"timing_beam_id": "1",
"bits_per_sample": 32,
"num_of_polarizations": 2,
"udp_nsamp": 32,
"wt_nsamp": 32,
"udp_nchan": 24,
"num_frequency_channels": 432,
"centre_frequency": 100000000.0,
"total_bandwidth": 361689.8148,
"observation_mode": "FLOW_THROUGH",
"observer_id": "jdoe",
"project_id": "project1",
"pointing_id": "pointing1",
"source": "J1921+2153",
"itrf": [5109360.133, 2006852.586, -3238948.127],
"receiver_id": "receiver3",
"feed_polarization": "CIRC",
"feed_handedness": 1,
"feed_angle": 1.234,
"feed_tracking_mode": "FA",
"feed_position_angle": 10.0,
"oversampling_ratio": [8, 7],
"coordinates": {
"equinox": 2000.0,
"ra": "19:21:44.815",
"dec": "21.884"
},
"max_scan_length": 20000.0,
"subint_duration": 30.0,
"receptors": ["SKA001", "SKA036"],
"receptor_weights": [0.4, 0.6],
"num_rfi_frequency_masks": 1,
"rfi_frequency_masks": [
[1.0, 1.1]
],
"destination_address": ["192.168.178.26", 9021],
"num_channelization_stages": 1,
"channelization_stages": [{
"num_filter_taps": 1,
"filter_coefficients": [1.0],
"num_frequency_channels": 10,
"oversampling_ratio": [8, 7]
}],
"ft": {
"num_bits_out": 4,
"channels": [0, 24299],
"polarizations": "Both",
"requantisation_scale": 1.0,
"requantisation_init_time": 1.0
}
}
},
"transaction_id": "txn-....-00001"
}
Example (CSP configuration for PST voltage recording scan)
{
"interface": "https://schema.skao.int/ska-csp-configurescan/3.0",
"common": {
"config_id": "sbi-mvp01-20200325-00001-science_A",
"frequency_band": "1",
"subarray_id": 1,
"eb_id": "eb-m001-20230712-56789"
},
"cbf": {
"fsp": [{
"fsp_id": 1,
"function_mode": "CORR",
"frequency_slice_id": 1,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 0,
"output_link_map": [
[0, 1]
]
}, {
"fsp_id": 2,
"function_mode": "CORR",
"frequency_slice_id": 2,
"integration_factor": 1,
"channel_averaging_map": [
[0, 2],
[744, 0]
],
"channel_offset": 740,
"output_link_map": [
[0, 1]
]
}],
"vlbi": {},
"delay_model_subscription_point": "ska_mid/tm_leaf_node/csp_subarray_01/delayModel"
},
"pst": {
"scan": {
"activation_time": "2022-01-19T23:07:45Z",
"timing_beam_id": "1",
"bits_per_sample": 32,
"num_of_polarizations": 2,
"udp_nsamp": 32,
"wt_nsamp": 32,
"udp_nchan": 24,
"num_frequency_channels": 432,
"centre_frequency": 100000000.0,
"total_bandwidth": 361689.8148,
"observation_mode": "VOLTAGE_RECORDER",
"observer_id": "jdoe",
"project_id": "project1",
"pointing_id": "pointing1",
"source": "J1921+2153",
"itrf": [5109360.133, 2006852.586, -3238948.127],
"receiver_id": "receiver3",
"feed_polarization": "LIN",
"feed_handedness": 1,
"feed_angle": 1.234,
"feed_tracking_mode": "FA",
"feed_position_angle": 10.0,
"oversampling_ratio": [8, 7],
"coordinates": {
"equinox": 2000.0,
"ra": "19:21:44.815",
"dec": "21.884"
},
"max_scan_length": 20000.0,
"subint_duration": 30.0,
"receptors": ["SKA001", "SKA036"],
"receptor_weights": [0.4, 0.6],
"num_channelization_stages": 1,
"channelization_stages": [{
"num_filter_taps": 1,
"filter_coefficients": [1.0],
"num_frequency_channels": 10,
"oversampling_ratio": [8, 7]
}]
}
},
"transaction_id": "txn-....-00001"
}
type |
object |
||
properties |
|||
|
type |
string |
|
|
A transaction ID specific to the command |
||
type |
string |
||
|
subarray 3.0 |
||
subarray section, containing the parameters relevant only for the current sub-array device. This section is not forwarded to any subelement. |
|||
type |
object |
||
properties |
|||
|
Name and scope of current subarray the sub-array. |
||
type |
string |
||
additionalProperties |
True |
||
|
PSS configuration schema 0.1 |
||
type |
object |
||
properties |
|||
|
type |
array |
|
items |
|||
additionalProperties |
True |
||
|
Common section, containing the parameters and the sections belonging to all CSP subsystems. This section is forwarded to all sub-elements. |
||
|
Correlator and Beamformer specific parameters. This section contains the parameters relevant only for CBF sub-element. This section is forwarded only to CBF subelement. Most of it to be borrowed from IICD |
||
|
PST configuration 2.5 |
||
PST specific parameters. To be borrowed from IICD |
|||
type |
object |
||
properties |
|||
|
PST specific scan configuration parameters. |
||
|
PST specific beam configuration parameters. Deprecated: As of version 2.3 this schema has no elements and is deprecated, and has been removed in version 3.0 of the schema. |
||
additionalProperties |
True |
||
additionalProperties |
True |
||
PSS_beam_config_0.1
type |
object |
||
properties |
|||
|
Search Beam ID. |
||
type |
integer |
||
|
Right Ascension of sub-array beam target, in degrees. |
||
type |
number |
||
|
Declination of sub-array beam target, in degrees. |
||
type |
number |
||
|
reference frame for pointing coordinates |
||
type |
string |
||
|
Centre frequency of the search beam. |
||
type |
number |
||
|
Beam delay center, relative to the array delay center. |
||
anyOf |
type |
number |
|
type |
string |
||
|
Per beam destination host address for PSS output. |
||
type |
string |
||
|
Per beam destination port for PSS output. |
||
type |
integer |
||
additionalProperties |
True |
||
Common_configuration_schema_3.0
Common section, containing the parameters and the sections belonging to all CSP subsystems. This section is forwarded to all sub-elements.
type |
object |
||
properties |
|||
|
type |
string |
|
|
The Subarray ID that the list of receptors will be assigned to. For Mid, there are a maximum of 16 subarrays. Range: Integer from 1-16 inclusive |
||
type |
integer |
||
|
Execution block ID to associate scan configs to an observation. This ID is used for associating generated data, especially data products, for a given observation. Multiple scans can be linked to one observation and this ID is used as metadata to associate the data products from all scans of the same observation. This ID does not have to be unique for a scan configuration but should be unique for different observations. For example, all the data and weights files will have an EB_ID header value populated with the value supplied in this field. |
||
type |
string |
||
|
Center frequency for the Band-of-Interest. Required if Band is 5a or 5b; not specified for other Bands (not configurable for Band 1 and 2). Input for Band 5a and 5b consists of two 2.5 GHz streams; the center frequency can be independently tuned for each stream. The following nomenclature is used to refer to Band 5a and 5b streams: 5a1, 5a2, 5b1, 5b2. |
||
type |
array |
||
items |
type |
number |
|
|
Frequency band applies for all the receptors (VCCs) that belong to the sub-array. Valid bands include: 1, 2, 5a, 5b. Bands 3 and 4 are not included in the current implementation but could be supported in the future. |
||
type |
string |
||
additionalProperties |
True |
||
CBF_config_3.0
Correlator and Beamformer specific parameters. This section contains the parameters relevant only for CBF sub-element. This section is forwarded only to CBF subelement. Most of it to be borrowed from IICD
type |
object |
|
properties |
||
|
Optionally, an offset can be specified so that the entire observed band is shifted in Hz (to accommodate a Zoom Window that crosses a ‘natural’ Frequency Slice boundary). If specified, applies for all the receptors in the sub-array. Bands 1 and 2: input from the receptor consists of a single data stream; the Frequency Band Offset (FBO) should be specified for Stream 1 only. Bands 5a and 5b: input from the receptor consists of two data streams; the FBO can be specified for each stream independently. Note: For Band 5a and 5b the frequency shift is performed by the receptor (DISH). Range: Integer from -100000000 to 100000000 inclusive (+/- 0.5 * Frequency Slice BW) |
|
type |
integer |
|
|
See frequencyBandOffsetStream1 Range: Integer from -100000000 to 100000000 inclusive (+/- 0.5 * Frequency Slice BW) |
|
type |
integer |
|
|
FQDN of TMC.DelayModel TANGO attribute which exposes delay values for all the dishes assigned to a Subarray in JSON format. Delay values are updated every 10 seconds. |
|
type |
string |
|
|
Specified as needed in advance of the scan start and/or during the scan. Delivered using publish-subscribe mechanism (see ICD Section 3.8.8.5.7). |
|
type |
object |
|
properties |
||
additionalProperties |
True |
|
|
type |
array |
items |
||
|
Very Long Baseline Interferometry specific parameters. To be borrowed from IICD This section contains the parameters relevant only for VLBI. This section is forwarded only to CSP subelement. |
|
|
type |
array |
items |
Up to two 300 MHz Search Windows can be optionally configured and used as input for Transient Data Capture and/or Pulsar Search beam-forming. |
|
additionalProperties |
True |
|
FSP_config_3.0
type |
object |
||||
properties |
|||||
|
type |
integer |
|||
|
type |
string |
|||
|
Optionally a subset of receptors to be correlated can be specified. If not specified, all receptors that belong to the subarray are cross-correlated (i.e. visibilities for all the baselines in the subarray are generated and transmitted to SDP). Valid receptor IDs include: SKA dishes: “SKAnnn”, where nnn is a zero padded integer in the range of 001 to 133. MeerKAT dishes: “MKTnnn”, where nnn is a zero padded integer in the range of 000 to 063. |
||||
type |
array |
||||
items |
type |
string |
|||
|
Frequency Slice to be processed on this FSP (valid range depends on the Frequency Band). |
||||
type |
integer |
||||
|
Integration time for the correlation products, defines multiple of 140 milliseconds (125 ms starting from AA2). Range: Integer from 1-10 inclusive |
||||
allOf |
type |
integer |
|||
|
Table of up to 20 x 2 integers. Each of entries contains:
Explanation: Each FSP produces 14880 (TBC) fine channels across the correlated bandwidth (Frequency Slice or Zoom Window). Channels are evenly spaced in frequency. TM shall provide the table that for each FSP and each group of 744 channels (there are 20 groups per FSP) indicates the channel averaging factor. More precisely, for each group the TMC provided table specifies: The start channel ID will be shifted internally according to the channel_offset value if specified.
and so on. If no entry is present for an FSP, the averaging settings of the previous FSP are still applicable. |
||||
type |
array |
||||
items |
allOf |
type |
array |
||
items |
type |
integer |
|||
|
Channel ID to use for visibilities of the first channel produced by this FSP. For example, if the channel offset is 5000 the first channel group would span IDs 5000-5743. Note that this offset does not apply to channel maps in this structure:
|
||||
type |
integer |
||||
|
Output links to emit visibilities on for every channel, given as a list of start channel ID to link ID. Where no value is given for concrete channel, the previous value should be used. For AA0.5 and AA1, the link map will only allow a single entry with a link ID of 1. The start channel ID will be shifted internally according to the channel_offset value if specified. Ranges: Start Channel ID: Integer from 0 to 14879 inclusive Link ID: Integer of value 1 |
||||
type |
array |
||||
items |
type |
array |
|||
items |
type |
integer |
|||
|
Output host to send visibilities to for every channel, given as a list of start channel ID to host IP addresses in dot-decimal notation. Where no value is given for a concrete channel, the previous value should be used. If output_host is not specified, then the Mid.CBF will not send any output products to SDP. The start channel ID will be shifted internally according to the channel_offset value if specified. Ranges: Start Channel ID: Integer from channel_offset to (channel_offset + 14879) inclusive Host IP: String w/ any valid IPv4 in dot-decimal notation [0.0.0.0-255.255.255.255] |
||||
type |
array |
||||
items |
type |
array |
|||
items |
anyOf |
type |
integer |
||
type |
string |
||||
|
Output port to send visibilities to for every channel, given as a list of start channel ID to port number. When no port number is given for a concrete channel, the previous value will be used. The format is a restricted ska_schemas.channel_map (see restrictions below) If output_port is not specified, then the Mid.CBF will not send any output products to SDP. The start channel ID will be shifted internally according to the channel_offset value if specified. Example: channel_offset: 111
output_port: [
[0, 9000],
[20, 9001],
[40, 9002],
...
[14840, 9742],
[14860, 9743]
]
Which will unpack to: Channel 111 to port 9000
Channel 112 to port 9000
...
Channel 130 to port 9000
Channel 131 to port 9001
...
Channel 150 to port 9001
Channel 151 to port 9002
...
Channel 14950 to port 9741
Channel 14951 to port 9742
...
Channel 14970 to port 9742
Channel 14971 to port 9743
...
Channel 14990 to port 9743
Format Restrictions At most 744 ports can be defined for an FSP The first start channel ID in the list must be 0 Start channel IDs must be in ascending order For AA0.5 and AA1, the start channel IDs must be in increments of 20 At most 20 channels can be sent to the same port per host Start Channel ID: Integer from 0 to 14879 inclusive Port Number: Integer from 0 to 65535 inclusive |
||||
type |
array |
||||
items |
type |
array |
|||
items |
type |
integer |
|||
additionalProperties |
True |
||||
VLBI_config_3.0
Very Long Baseline Interferometry specific parameters. To be borrowed from IICD This section contains the parameters relevant only for VLBI. This section is forwarded only to CSP subelement.
type |
object |
|
properties |
||
|
type |
string |
additionalProperties |
True |
|
Search_window_config_3.0
Up to two 300 MHz Search Windows can be optionally configured and used as input for Transient Data Capture and/or Pulsar Search beam-forming.
type |
object |
|
properties |
||
|
Identifier of the 300MHz Search Window. Unique within a sub-array. |
|
type |
integer |
|
|
The Search Window tuning is provided in absolute terms as RF center frequency. The Search Window must be placed within the observed band. If partially out of the observed Band a warning is generated. If completely outside of the observed Band an exception is generated. |
|
type |
integer |
|
additionalProperties |
True |
|
PST_scan_configuration_2.5
PST specific scan configuration parameters.
type |
object |
||||
properties |
|||||
|
Date and time when to start the PST reconfiguration. Deprecated: this field has been removed in version 3.0 of the PST schema. This field has never been used by PST and was always ignored. Units: UTC timestamp Keyword: ACTIVATION_TIME |
||||
type |
string |
||||
|
The number of bits per complex-values time sample in the CBF output data. Valid values are 16, 24, or 32. Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Keyword: NBIT |
||||
type |
integer |
||||
|
The number of polarizations in the CBF output data. Valid values are 1 or 2. Note: all SKA receivers produce two polarisation inputs, and the correlator produces products for both polarisations. The value of 1 was added to allow for future capability if the need arises. Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Keyword: NPOL |
||||
type |
integer |
||||
|
The number of time samples for each single polarization and the a single frequency in each UDP packet sent by CBF. Note: this must be an integer multiple of WT_NSAMP Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Range: 32 (Low), 4 (Mid) Keyword: UDP_NSAMP |
||||
type |
integer |
||||
|
The number of time samples described by as single relative weight. There is a unique relative weight for each frequency channel, and each relative weight describes both polarizations. Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Range: 32 (Low), 4 (Mid) Keyword: WT_NSAMP |
||||
type |
integer |
||||
|
The number of contiguous frequency channels in each UDP packet sent by CBF. Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Range: 24 (Low), 185 (Mid) Keyword: UDP_NCHAN |
||||
type |
integer |
||||
|
The total number of frequency channels into which the total critical bandwidth has been divided. This must be an integer multiple of udp_nchan Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. It is also required to be a multiple of the udp_chan which is also now deprecated for the same reason. Range: 1 to 82944 Keyword: OBSNCHAN |
||||
type |
integer |
||||
|
Centre frequency of the total (critical) bandwidth spanned by the frequency channels. Units: Hz Range: 50e6 to 12800e6 Keyword: OBSFREQ |
||||
type |
number |
||||
|
Total (critical) bandwidth spanned by the channels of the observation. Low: 0.00361 to 300 MHz Mid: 0.053.76 to 2500 MHz Units: Hz Range: 3610 to 2.5e9 Keyword: OBSBW |
||||
type |
number |
||||
|
The PST processing mode used for the scan. The value VOLTAGE_RECORDER is added for AA0.5, while the other values will be needed in the future for data processing. Deprecated: this field has been renamed to
Keyword: OBSMODE |
||||
type |
string |
||||
|
The observer in charge of the observations. Keyword: OBSERVER |
||||
type |
string |
||||
|
The project that the observations are for. Keyword: PROJID |
||||
type |
string |
||||
|
The ID for the sub-array pointing. Deprecated: this field has been removed in version 3.0 of the PST schema. Keyword: PNT_ID |
||||
type |
string |
||||
|
The name of the source. Keyword: SRC_NAME |
||||
type |
string |
||||
|
The International Terrestrial Reference Frame (ITRF) coordinates of the telescope delay centre. Deprecated: this field has been renamed to “delay_centre” in version 3.0 of the PST schema. Units: metres Keyword: ITRF |
||||
type |
array |
||||
items |
type |
number |
|||
|
The receiver name or ID. Keyword: FRONTEND |
||||
type |
string |
||||
|
The native polarization of feed. Deprecated: this field has been removed in version 3.0 of the PST schema. Range: LIN or CIRC Keyword: FD_POLN |
||||
type |
string |
||||
|
Code for sense of feed. For value of +1 for XYZ forming RH set with Z in the direction of propagation. Looking up into the feed of a prime-focus receiver or at the sky). For FD_HAND = +1, the rotation from A (or X) to B (or Y) is counter clockwise or in the direction of increasing Feed Angle (FA) or Position Angle (PA). For circular feeds, FD_HAND = +1 for IEEE LCP on the A (or X) probe. Deprecated: this field has been removed in version 3.0 of the PST schema. Range: -1 or +1 Keyword: FD_HAND |
||||
type |
integer |
||||
|
Feed angle of the E-vector for an equal in-phase response from the A(X) and B(Y) probes, measured in the direction of increasing feed angle or position angle (clockwise when looking down on a prime focus receiver). Deprecated: this field has been removed in version 3.0 of the PST schema. Units: degrees Range: -180 to 180. Keyword: FD_SANG |
||||
type |
number |
||||
|
The tracking mode for the feed:
Deprecated: this field has been removed in version 3.0 of the PST schema. Range: FA, CPA, SPA, or TPA Keyword: FD_MODE |
||||
type |
string |
||||
|
The requested angle of feed reference. For feed_mode = ‘FA’ this is respect to the telescope’s reference frame (feed_angle = 0), and for feed_mode = ‘CPA’ this is with respect to the celestial north (parallactic angle = 0) or with respect to the Galactic north for coordinate_mode = ‘GALACTIC’. Deprecated: this field has been removed in version 3.0 of the PST schema. Range: -180 to +180. Keyword: FA_REQ |
||||
type |
number |
||||
|
The oversampling ratio expressed as a fraction as an array of int, with the first value the numerator and the second is the denominator. (e.g. 8/7 is assigned as [8,7]). Deprecated: this field has been removed in version 3.0 of the PST schema. This can be inferred from the telescope and and frequency band. Range: 8/7 or 4/3 Keyword: OVERSAMP |
||||
type |
array |
||||
items |
type |
integer |
|||
|
The tied-array beam’s tracking co-ordinates. As of version 2.2 of the schema this only handles equatorial tracking which means uses RA/Dec J2000.0 coords but PST may support different tracking modes and coordinates the future. |
||||
|
The maximum length of the observation. Units: seconds Range: 30 - 43200 Keyword: SCANLEN_MAX |
||||
type |
number |
||||
|
The length of each output sub-integration. Units: seconds Range: 1 - 60 Keyword: OUTSUBINT |
||||
type |
number |
||||
|
An array of receptor IDs for the receptors included in the sub-array. Keyword: ANTENNA |
||||
type |
array |
||||
items |
type |
string |
|||
|
Weight for each receptor. Range: 0 - 1.0 Keyword: ANT_WEIGHTS |
||||
type |
array |
||||
items |
type |
number |
|||
|
The number of frequency ranges to be masked. Deprecated: this field has been removed in version 3.0
of the PST schema. This is will be inferred by length of
Range: 0 - 1024 Keyword: NMASK |
||||
type |
integer |
||||
|
A two-dimensional array of length of num_frequency_mask of known RFI frequency ranges to excise from the data. The array contains mask pairs of [f_min, f_max] pairs for known frequency ranges containing RFI not excised by the CBF. The overall dimension of this array is num_frequency_mask x 2. Units: Hz Keyword: FREQ_MASK |
||||
type |
array |
||||
items |
allOf |
type |
array |
||
items |
type |
number |
|||
|
The destination address for the PST output data. Includes IPv4 Address, port number. Deprecated: this field has been removed in version 3.0 of the PST schema. |
||||
type |
array |
||||
items |
anyOf |
type |
string |
||
type |
integer |
||||
|
Identifier for a test vector that will be present in the tied-array beam data stream beam CBF and PST. Deprecated: This field has never been used and has been removed in version 3.0 of the PST schema. Keyword: TEST_VECTOR |
||||
type |
string |
||||
|
PST specific parameters for the ‘PULSAR_TIMING’ mode configuration. |
||||
|
PST specific parameters for the ‘DETECTED_FILTERBANK’ mode configuration. |
||||
|
PST specific parameters for the ‘FLOW_THROUGH’ mode configuration. |
||||
|
The number of stages used to channelize the data: e.g. * for Low, there are 2 stages: 1 in LFAA and 1 in CBF * for Mid, there are 2 stages: 1 in FSP and 1 in PST BF. Deprecated: This field has been removed in version 3.0
of the PST schema. The information for this field and
Keyword: NSTAGE |
||||
type |
integer |
||||
|
List of configuration for each channelization stage. Deprecated: This field has been removed in version 3.0
of the PST schema. The information for this field and
|
||||
type |
array |
||||
items |
PST specific parameters for channelization stage configuration. Deprecated: This field has been deprecated and has been removed in version 3.0 of PST schema. |
||||
|
Identifier assigned by LMC/TMC used to identify the beam configuration. PST selects which PST server to use for this scan and timing beam, and provides a mapping from the timing beam identifier by the TMC to PST capability id. Keyword: BEAM |
||||
type |
string |
||||
additionalProperties |
True |
||||
PST_RA_Dec_coordinates_2.5
PST specific parameters for RA/Dec tracking coordinates.
type |
object |
|
properties |
||
|
The coordinate epoch. This can be in Julian date or Modified Julian Date. Units: years Range: >= 2000 Keyword: EQUINOX |
|
type |
number |
|
|
The Right Accession (RA) of the coordinates used for tracking. Valid formats is ‘hh:mm:ss.sss’ or ‘ddd.ddd’ Keyword: STT_CTD1 |
|
type |
string |
|
|
The declination (Dec) of the coordinates used for tracking. Valid formats is ‘hh:mm:ss.sss’ or ‘ddd.ddd’ Keyword: STT_CTD2 |
|
type |
string |
|
additionalProperties |
True |
|
PST_PULSAR_TIMING_mode_configuration_2.5
PST specific parameters for the ‘PULSAR_TIMING’ mode configuration.
type |
object |
|
properties |
||
|
The dispersion measure for coherent/incoherent de-dispersion. Units: pccm^-3 Range: 0 - 100000 Keyword: DM |
|
type |
number |
|
|
The rotation measure for phase-coherent Faraday rotation correction. Units: radians per metre squared Keyword: RM |
|
type |
number |
|
|
The ephemeris of the pulsar being observed. Units: PSRCAT compatible ASCII string Keyword: EPHEMERIS |
|
type |
string |
|
|
Pulsar phase predictor generated from ephemeris. Units: TEMPO2 compatible ASCII string Keyword: PREDICTOR |
|
type |
string |
|
|
The number of output frequency channels. This must be between 1 and the number of observation channels. Keyword: OUTNCHAN |
|
type |
integer |
|
|
The number of output phase bins. Range: 64 - 2048 Keyword: OUTNBIN |
|
type |
integer |
|
|
Removed in version 4.0. |
|
type |
integer |
|
|
List of spectral kurtosis configurations. |
|
type |
array |
|
items |
PST specific parameters for the spectral kurtosis (SK) for the ‘PULSAR_TIMING’ mode. |
|
|
The signal-to-noise ratio (SNR) of the on-pulse flux for the scan. May be used to prematurely end a scan when the integrated SNR reaches the target. A value of 0 indicates there is no limit. Keyword: TARGET_SNR |
|
type |
number |
|
additionalProperties |
True |
|
PST_spectral_kurtosis_configuration_2.5
PST specific parameters for the spectral kurtosis (SK) for the ‘PULSAR_TIMING’ mode.
type |
object |
||
properties |
|||
|
Frequency ranges for each spectral kurtosis (SK) configuration. Use a pair of channel index values instead. |
||
type |
array |
||
items |
type |
number |
|
|
The number of input time samples integrated into each spectral kurtosis (SK) statistic. Range: 64 - 1024 Keyword: SK_INTS |
||
type |
integer |
||
|
Spectral kurtosis excision limits (RFI threshold) in units of standard deviations. Range: 1 - 100 Keyword: SK_EXIS |
||
type |
number |
||
additionalProperties |
True |
||
PST_DETECTED_FILTERBANK_mode_configuration_2.5
PST specific parameters for the ‘DETECTED_FILTERBANK’ mode configuration.
type |
object |
|
properties |
||
|
The dispersion measure for coherent/incoherent de-dispersion. This is only required for pulsar timing and Detected Filterbank modes. Range: [0, 100000] Keyword: DM |
|
type |
number |
|
|
The rotation measure for phase-coherent Faraday rotation correction. Units: radians per metre squared Keyword: RM |
|
type |
number |
|
|
The number of output frequency channels. This must be between 1 and the number of observation channels. Keyword: OUTNCHAN |
|
type |
integer |
|
|
The Stokes parameters to output when in Detected Filterbank mode. Range: string with a combination of I, Q, U, and V. Keyword: STOKES_FB |
|
type |
string |
|
|
The number of bits per output sample. Range: 1, 2, 4, 8, or 16 Keyword: NBIT_OUT |
|
type |
integer |
|
|
The number of input samples per output time sample when in Detected Filterbank mode. Keyword: TDEC_FB |
|
type |
integer |
|
|
The number of input frequency channels incoherently added to each output frequency channel in Detected Filterbank. This is required in addition to output_frequency_channels because some frequency channels may be merged coherently to increase temporal resolution. Keyword: FDEC_FB |
|
type |
integer |
|
|
List of spectral kurtosis configurations. |
|
type |
array |
|
items |
PST specific parameters for the spectral kurtosis (SK) for the ‘PULSAR_TIMING’ mode. |
|
|
Removed in version 4.0. |
|
type |
integer |
|
|
Removed in version 4.0. |
|
type |
number |
|
|
Removed in version 4.0. |
|
type |
number |
|
additionalProperties |
True |
|
PST_FLOW_THROUGH_mode_configuration_2.5
PST specific parameters for the ‘FLOW_THROUGH’ mode configuration.
type |
object |
|||
properties |
||||
|
The number of bits per output sample. Range: 1, 2, 4, 8, 16, or 32 Keyword: NBIT_OUT |
|||
type |
integer |
|||
|
The indices of the first and last (inclusive) frequency channels that define the single contiguous range of frequency channels to be recorded. Keyword: CHAN_FT |
|||
allOf |
type |
array |
||
items |
type |
integer |
||
|
Scale factor applied during re-quantisation that modifies the dynamic range of the fixed precision output. By default, for 2, 4, and 8 bits per sample, data will be scaled to minimize scattered power by adopting the Optimum Input Threshold Spacing for a Uniform Digitizer defined in Table 3 of Jenet & Anderson (1998; PASP 110:1467). For more than 8 bits per sample, the values from Table 3 of Jenet & Anderson (1998) are extrapolated to num_bits_out-2, such that 2 bits are retained as additional headroom for RFI. For all num_bits_out, the standard deviation is that of either the real or imaginary part of each complex-valued sample. The default scale factor is computed such that, after multiplication by this scale factor, the data would satisfy the conditions described above. This default scale factor is multiplied by requantisation_scale. Therefore, a requantisation_scale value greater than 1 increases the value of the floating point data before it is cast to a fixed precision value, thereby reducing the overhead available to represent RFI and increasing the probability of clipping. Keyword: DIGITIZER_SCALE |
|||
type |
number |
|||
|
The polarizations to be recorded. Valid values: A, B, or Both Keyword: POLN_FT |
|||
type |
string |
|||
|
Time interval spanned by data used at the start of a scan to determine the scale factors applied before re-quantisation. Units: seconds Keyword: DIGITIZER_INIT_TIME |
|||
type |
number |
|||
additionalProperties |
True |
|||
PST_channelization_stage_configuration_2.5
PST specific parameters for channelization stage configuration.
Deprecated: This field has been deprecated and has been removed in version 3.0 of PST schema.
type |
object |
||
properties |
|||
|
Total number of taps in the prototype filter (i.e. over all arms) used in the stage. Deprecated: This field has been deprecated and has been
removed in version 3.0 of PST schema. This field can also be
inferred from the length of the Keyword: NSTAP_k |
||
type |
integer |
||
|
An array of filter coefficients that define the (time domain) response function of the prototype filter used in the stage. Length of this is num_filter_taps. Deprecated: This field has been deprecated and has been removed in version 3.0 of PST schema. Keyword: COEFF_k |
||
type |
array |
||
items |
type |
number |
|
|
The number of frequency channels output by each polyphase filter bank (PFB) for this stage. Deprecated: This field has been deprecated and has been removed in version 3.0 of PST schema. This field can be determined by which telescope and frequency band. Keyword: NCHAN_PFB_k |
||
type |
integer |
||
|
The oversampling ratio expressed as a fraction as an array of int, with the first value the numerator and the second is the denominator. (e.g. 8/7 is assigned as [8,7]). Deprecated: This field has been deprecated and has been removed in version 3.0 of PST schema. This field can be determined by which telescope and frequency band. Keyword: OVERSAMP_k |
||
type |
array |
||
items |
type |
integer |
|
additionalProperties |
True |
||
PST_beam_configuration_2.5
PST specific beam configuration parameters.
Deprecated: As of version 2.3 this schema has no elements and is deprecated, and has been removed in version 3.0 of the schema.
type |
object |
properties |
|
additionalProperties |
True |